Best Tape Measure For Woodworking Home Workshop And DIY

A tape measure is a tool used by DIYers, hobbyists, and professionals alike. It comes in many sizes, from small designs that measure six-feet or less up to 100-feet or more in length. The best tape measure for woodworking will be 25-feet or less, as most woodworking projects do not use lumber longer than this.

A long measuring tape uses a hand crank on the side of the tape housing to collect the ribbon after you take the measurement. That might be fine if you are a surveyor or taking readings across your property, but it is slow for the shop or around the house. I feel that the best tape measure designs use a spring-loaded return.

A spring-loaded return allows the housing to be more compact, a feature that leads to the alternative name of “pocket tape.” These designs have a lock button that keeps the ribbon extended until you are finished. When you are ready, the ribbon (which is under tension) is pulled back into the case by the spring.

The best tape measure products include extra markings that several tradespeople will find helpful. For example, carpenters have come to appreciate Stanley’s black diamond stud markings, which sit along on the tape at industry standard intervals. You will find that the best tape measure for woodworking will not need these types of markings but should mark smaller increments of an inch instead.

The best tape measure feature you should look for is accuracy. Today’s tape measure designs use laser-etched markings on the ribbon that are precise. You can expect errors of 1/32-inch or less for every six feet of ribbon, which will be negligible in most DIY or hobbyist shops.

The hooked tip of a measuring tape is standard, and it is loose intentionally. The best tape measure designs allow the hook to collapse when pushed against walls on interior measurements or to extend over the edge of materials as you take exterior readings. That provides the inside measurements from the end of the ribbon or outside readings from the ribbon’s end.

Large print and high-contrast markings that are easy to read are a must-have for my middle-aged eyes and are a feature found on the best tape measure for woodworking. The best tape measure ribbon colors are light, usually yellow or white. Most products use black lines and numbers for markings, but I have discovered that the best tape measure designs add red for specialized marks on the ribbon for quick referencing.

Before the measuring tape, folding rulers (or folding rules) were used by amateurs and professionals alike. Tape measures became more popular in recent decades, but the folding ruler has a place in my shop. I use the folding ruler more often than I do my tape measure with most projects.

The design is smaller and remains stiff during use. I can also place it on a board without a ribbon recoiling into a case.

One of the folding ruler tricks that makes it more accurate than a tape is its ability to measure interior spaces. It butts against both interior walls, something that a tape measure can not do.

Several folding ruler tricks increase the layout speed in a shop, including modifications that allow you to use the ruler as a compass or layout a circle.

Using a hinged section of the ruler to mimic an angle of two connecting boards is another favorite among folding ruler tricks and is useful for DIYers and carpenters. I also find the folding ruler easier to control than I do a tape measure.

…

Are Garden Timber Cabins Water Resistant?

Are garden timber cabins rainproof is a query we got asked all the time here at Timberdise.

The short simple answer to your query is a definite yes!

Why would they not be?

Well, let’s take a look at some of the potential complications with a timber cabin which would make the timber cabin not rainproof and fairly honestly not fit for purpose. The main thing to look at immediately is the roof, that’s where you would visualize the main problem would start (this is not always the situation but that’s where we will start today).

The main problem with the roof would be to have the felt or shingling to not be mounted properly. This is fairly easily done if this is something you have never done before and why it should always be undertaken by an expert particularly if you are investing a lot of your hard earned money on a timber cabin.

• Make sure that the overlies are overlapping in the proper way. You should always start felting at the bottom of the construction and felt upwards. By doing this you ensure that the felt overlies on top of the piece of felt that is further down the roof. This will ensure there is a natural run off of the water, if you start felting at the top of the roof and you put the overlap from the bottom pieces over the top of the felt higher up when the rain runs off it will work under the felt and therefor trigger a water leak. This is just exactly the same when doing shingles, make sure you install from bottom upwards.

• Make sure the overlies of the felt/shingles are fairly generous. You don’t want them to be just barely overlapping because this could trigger rainwater to get between the felt sheets and this will trigger a water leak

• Make sure you use enough felt nails. Ideally you want to be spacing the felt nails around 6 inches apart from each other. Always do this on both sides of the felt and dependent on the quality of the felt you are using possibly put another row of tack in the middle, possibly two rows but again this depends on the quality of the felt. Failure to put enough felt tack in there could result in the felt blowing off during a bad storm which would then leave your construction subjected to leaks.

• It is in addition crucial that when you reach the overhang of the construction with the felt you pin the felt to side of the roof but DO NOT tuck the felt under the overhang of the roof as this limits the natural run off of the water. This can trigger early rotting of the construction and in some cases trigger the roof to water leak around the top corners of the construction as water could build up.

• Make sure you use the right size fixings. If the roofing system boards on your construction are let’s say 10mm,you don’t want felt nails of 16mm. Doing this would trigger the felt nails to come completely through the roof. This would not look cosmetically appealing and would in addition be a real option of a water leak in the construction. They way felt is now designed, there should be a watertight seal around the nail but throughout the seasons with wear and tear this may fail resulting in a water leak.

• The most frequently ignored area on a timber cabin construction is the felt or shingles on the roof. This is mainly because we can’t see it most of the time and it’s a lot more difficult to get up there and have a look,but this is just exactly what you should do and I would highly recommend at least once a year or if you notice a water leak. Because timber cabins are not built as high as the normal house and the felt and shingles aren’t fairly as tough and resilient as a normal house tile they require a little more focus. They are subjected to more elements on a daily basis because they are lower,this can result in a number of things from falling debris from trees,or another good example would be a children’s toys getting thrown up there which would all trigger harm to the felt/shingles. Not to mention lots of bird excrement can rot the felt if it is in an area where natural rainwater can not pass through it to create a natural run off and cleaning system (for good example if your timber cabin sits under a plant).

Timberdise Garden Buildings install all of our timber cabins, we do this because we know you are investing a lot of money into a timber cabin and you want it to be around for a long period of time. So the best way we can ensure this happens is to take care of the installation and make sure it is mounted properly. We’ve been out to repair timber cabins in the past built by non-skilled people and if the construction is not put together properly then number one it won’t be safe but in addition it could trigger a failure in the construction to be rainproof.

A prime good example of this would be that the logs haven’t been constructed properly on the walls. This would then trigger the timber cabin to differ from the design as it was intended to be. At this point when the roof was mounted there might be openings between the roof and the wall. Spaces could in addition appear on the walls of the timber cabins themselves and in some situations if the initial build of the timber cabin was so bad you would have no choice but to take down the timber cabin and reconstruct it.

This is why Timberdise install all of our timber cabins so you don’t have this to worry about. As you can visualize if there is an opening in the wall or an opening between the roof and the wall this would leave the log cabin open and it would most definitely water leak which is what we want to avoid at all costs.

I in addition want to bring focus to the flooring a second. Having your timber cabin mounted on a proper ground base is a must. That could be a Timberdise ground base, cement base or a paved area. As long as they’re flat, level and solid you should be ok. Be mindful of where you put the log cabin, don’t put it anyplace that is at risk of flooding as just like the house that you live in. If the water level rises and there is no getaway for it then the timber cabin will flood, that is regardless of how thick and tight your logs are.

Lastly let’s talk about sealants around the windows and doors. Make sure after you have treated your log cabin you fit the relevant sealants around the doors and the windows. The cabins don’t come with these fitted as standard,this is so you can treat the log cabin first and then apply the sealants afterwards. By not fitting the doors and windows with sealants then there’s a chance rainwater could pass through the inside of the log cabin,which again is easily fixed by applying sealants.

Additionally, in some cases particularly during the winter months, condensation can occur inside a cabin. This is normal due to the cabins not having any insulation fitted, it is not a water leak and can be fairly normal. We encourage at Timberdise to get a dehumidifier if you have electrical access in there and leave it running during the cooler months. This will help take dampness out of the air and further increase the life-span of your log cabin.

If you comply with all the above ideas you should have a water leak free log cabin for the duration of its life-span which can provide unlimited pleasure and relaxation. Remember prevention is much better than the treatment.

…

How Does a Facelift Surgery Work?

Facelift Surgery is one of the most popular and widely used plastic surgeries for the beauty industry. Facelift companies and plastic surgeons sagging skin to restore a much more youthful, plumper facial look to a person. It’s often stated that receiving a facelift actually works to “re-plumb” the face, which is to say that it can make a person look much more youthful and fresh. It’s also been stated that a facelift can actually reduce the “sag” in the forehead that many people suffer from. In either case, this procedure has become extremely popular and plastic surgeons throughout the United States have performed countless Facelift Surgery procedures on a daily basis. For more information about Atlanta Plastic Surgeon Dr R Morgan Davoudi and the Atlantic Center for Plastic and Cosmetic Surgery in Atlanta GA call (770) 817-9999.

One of the most common complications from Facelift Surgery is a skin problem known as Sagging Facelift. In some rare cases, the skin on the forehead can tear at the incision site and cause an unnatural “sag” that actually looks worse than the sagging that was originally caused by the surgery. Fortunately, with advances in modern medical technology and cosmetic surgery, this particular issue is easily corrected. Here, you’ll learn more about what you can do to correct this problem with today’s modern facelift surgery.

The first step in correcting this problem is to carefully select a qualified cosmetic surgeon. Your surgeon should be board certified with a specialty in facial cosmetic surgery so that you are absolutely certain that he or she is qualified to perform your facelift surgery. If possible, try to select a surgeon who specializes in facial surgery, as that will ensure that you receive the best possible care and result from your procedure. Talk to Atlanta Plastic Surgeon Dr R Morgan Davoudi at the Atlantic Center for Plastic and Cosmetic Surgery today.

Once you have selected a good cosmetic surgeon, you then need to decide whether to undergo a traditional open surgical procedure like a facelift surgery or a more cutting edge, non-surgical procedure like liposuction. Liposuction offers many unique benefits for patients that aren’t happy with the look of their midsection. It offers a very natural and sleek look, which is very difficult to achieve with plastic surgery. You will also save money by avoiding a large set of post-operative care issues.

Non-surgical facelifts offer patients several unique benefits. Some of them include a permanent solution that can help reduce sagging and elongate the neck and face. Some cosmetic surgeons offer a non-surgical solution to frown lines, nasolabial lines and double chin. Another advantage offered by non-surgical facelifts is that they can be performed on the patient quickly and easily, which greatly improves the chances of your facial muscles regaining their elasticity.

Before you choose a facelift surgery, it is important that you visit your doctor and discuss with him or her the risks and side effects that go along with this new surgical procedure. You must also ask your doctor if there are any post-operative risks. Ask your surgeon about the amount of anesthesia used. Discuss any recommended prior treatments (i.e. scar revision, compression garments) that will be performed along with the facelift surgery.

Atlantic Center for Plastic and Cosmetic Surgery
258 Pharr Rd NE #4
Atlanta, GA 30305
(770) 817-9999
https://www.myatlantaplasticsurgeon.com

…

Can You Install A New Garage Door On Old Tracks?

Can You Install A New Garage Door On Old Tracks?

Can you install a new garage door on old tracks? You might think you don’t have the skills or ability to do it, but it’s actually quite simple to do. Garage doors are just like house elevators, they have tracks that run from the bottom of the garage to the ceiling. Most people install their garage doors on wooden tracks, these are called wood tracks. The problem with these wooden tracks is that over time the wood will rot and start to leak. If you’ve ever had your garage hosed by the rain or just simply had it get too wet in general you know that if your wooden garage door gets too wet it won’t close properly, it will just swell and be very difficult to open and close.

The best way to fix this is to get a new garage door installed on the old tracks, but how do you do that? If you have access to an overhead garage door opener you can easily lift the whole thing up and set it on the tracks for easy access. Otherwise, if you don’t have such access you’ll have to find someone with the skills and tools to take the weight off, which may require removing the existing tracks or cutting them down. Brand Garage Doors of Cleveland sells and installs garage doors on the correct tracks.

One thing to consider when trying to install a new door on old tracks is the fact that you want the track to run parallel to the wall. If you do this you’ll be able to get a good fit without any cutting or sanding of the track itself. Another option is to set the door at an angle, this way you won’t need to cut the track as much, if any at all. In order to get a good fit, there are many manufacturers that make specialty tools specifically designed for making new tracks and door panels. It’s not something most DIYers have the time or skills for, but if you do it can save you a lot of money and time in the long run.

If you have access to old tracks, especially those which are close to your home, you can salvage them for free. Take a look at the bottom of the garage door; you will probably see a metal track installed there. Unscrew it and discard that piece. Drill a pilot hole into that hole and insert a bolt which should be under the door for support. Now you can measure and cut the new tracks to the specifications you want.

If you can’t find any old garage door tracks which would allow you to install the new tracks for free, you might be able to buy them from a hardware store and install them yourself. Again, it’s not something most DIYers have the time or skills for, but if you do it might save you some money and a lot of headaches. Just remember though, if you install one part incorrectly it could ruin the whole thing, so it’s worth spending a little extra time and money before you go ahead.

Finally, you can hire somebody to install it for you. If you’ve never used a garage door opener in the past, then this might be the best option for you. They will know exactly how to work with the track, will make sure it works smoothly, and should be experienced enough to avoid problems. The downside is that you have to pay somebody. You have to factor in the cost of delivery and possible labor costs when you choose a door opener installation service.

…

What is the Average Cost of a New Garage Door?

What is the Average Cost of a New Garage Door?

The average cost of a new garage door is about $700. Brand Garage Doors, of course, has prices that vary depending on the number of styles and materials that are included in the door. For example, a door that is made from wood will obviously be much more expensive than one that is made from aluminum or steel. The average cost also includes the installation costs.

Most companies quote average prices for their doors on the Internet because they know that you cannot physically look at a door and quote an average price for it. When you walk into a store to buy a garage door however, you can look at a door and tell how much it costs. That is because the prices are usually displayed on a standard door frame with measurements of the width and height. This gives you a good idea of the price range for your door. Unfortunately, it does not give you information about the style, material and color that you might choose for your door.

What is the average cost of a garage door without installation? If you are just replacing a single garage door, the price you pay will probably be less than if you replace an entire garage door system. Especially if you are replacing an older model, the cost will be less because of the age of the garage door.

What is the average cost of a new garage door if you are replacing all your existing doors? This depends on the total number of doors that you are replacing. Adding up the individual prices for all your doors will give you a good idea of what your total budget will be. However, if you are replacing single doors, you will need to do more shopping around before you find a garage door that fits within your price range. It is often a good idea to comparison shop to get the best deal.

What is the average cost of a new garage door in your neighborhood? This will help you determine the average cost of garage doors in your area. Consider the cost of new doors that you see in home improvement stores. Keep in mind that even though these stores have higher-end doors, they are usually made from cheaper materials. You should also keep in mind that garage doors in this price range may be installed by a professional.

What is the average cost of a new garage door? This can be determined by several different factors. The obvious factor is the price. Even the most expensive door will not be priced outrageously in comparison to other garage doors. But you will need to consider the quality of the materials used in their manufacture and the overall cost before you decide on which door to buy.

…

Choosing the Best Plastic Surgery Clinic

The best plastic surgery procedures are those that enhance your life and health. However, if you have already opted to get cosmetic surgery, you might already be aware of some of the risks that go with it. For instance, breast augmentation will increase your chances of developing cancer, because the implants will be introducing new tissue into the body. Aside from cancer, there is also the risk of low-quality implants leaking scar tissue after surgery, requiring another set of implants to fix the problems. As you can see, it’s always best to be informed of what you’re getting into before you agree to have plastic surgery. Learn more about Dr William Portuese, a facial plastic surgeon in Seattle Washington.

Because this article is about the best plastic surgery options for women, we are going to focus on tummy tucks. The best plastic surgery procedure for a woman’s midsection is a tummy tuck, because this type of cosmetic surgery helps to tighten the abdominal area and eliminate excess skin, which makes the waist and hips look firmer and tighter. If you’ve always wanted to slim down your stomach, get your hands on a tummy tuck today! As with all cosmetic surgery procedures, you will need to pay for your procedure and consult with a plastic surgeon in order to ensure you’re doing the procedure correctly.

When looking for the best plastic surgery clinics, it’s important to find not only the best surgeons but also one that have the best reputation and service. Check out patient reviews for plastic surgery clinics online and read the stories of other patients who have had their work done at the clinic. You can also contact plastic surgeons from past and current clients to ask about the quality of their work, the satisfaction of their patients, and the overall experience. When making your decision, remember to keep these factors in mind:

Some plastic surgery clinics may boast of experienced doctors. But if you want to be sure that your procedure will go as well as possible, ask for actual client testimonials. The best cosmetic doctors are happy to share customer testimonials and often ask current clients if they can feature them on their website. These are only testimonials, of course; actual client photos are not included but seeing someone in person is always better than simply reading off of a website. It’s a good idea to choose one or two plastic surgeries that the best plastic surgeons have performed in the past that you are most interested in having done.

There are other things to consider when looking for the best plastic surgery clinics. For example, the surgeon must have years of experience performing cosmetic procedures. Contact Dr William Portuese | Seattle WA for more information at 206-624-6200. This shows that he knows what he is doing and is confident in his work. It also demonstrates that he is skilled at what he does. Many plastic surgeons specialize in certain areas, like facial rejuvenation or breast augmentations, and may only do those procedures. If the surgeon doesn’t offer a wide range of cosmetic procedures, or if you want a specific type of treatment, look elsewhere.

Finally, ask friends and family for recommendations of places to get cosmetic surgery done. Your friends may know of a clinic where they had a good experience or might be able to lead you to a clinic that their friends have had great experiences with. Some people feel uncomfortable linking their personal experiences to a particular doctor, so look for reviews and recommendations online, in magazines, or at partner clinics.

Dr William Portuese
1101 Madison St #1280
Seattle, WA, 98104 USA
206-624-6200
https://www.seattlefacial.com

…

How to Create A Beautiful & Ergonomic Home Office That Highlights Your Garden

According to a recent study by Stanford University, “42 percent of the U.S. labor force now works from home full-time” because of the COVID-19 pandemic. For many new at-home workers, working from home meant plopping your laptop on the kitchen counter or sitting on your plush sofa to get the job done.

A make-shift office was all you had to get through this temporary working arrangement. However, as the weeks turned into months, you are probably starting to figure out that your temp office isn’t so great for your back and other parts of your body.

Why Are Ergonomics Important?

Most individuals know that ergonomics has to do with the”relaxation” of different things, but there is more to the concept than how an object feels and looks. Ergonomics has a direct effect on your physical and emotional health.

“Ergonomic means that your installation supports your body correctly,” says Jamie Gold, a Mayo Clinic Certified Wellness Coach, and author. “This may cause fewer neck and back pains, headaches, less eye strain, and less risk of repetitive stress injury,” she says. “Any one or more of these from a non-ergonomic setup may cause a work slowdown or the need to take time off.”

An ergonomic space will keep you comfortable and help increase productivity and total well-being. “When we consider ergonomics, we often relegate our thoughts to comfy seating, appropriate custom desk dimensions, screen height, and can get as granular as the type of mouse or keyboard you use,” states Sherri Monte, a Seattle-based interior designer, home organizer, and educator. “While these things are important, what is missing in the interaction or ergonomics of our workstation is our wellbeing,” Monte says.

When you are comfortable and your body is properly aligned, you are happier. And, a happy employee is more productive. With an ergonomic workspace benefits you and your company. The good news is that making an ergonomic home office isn’t time consuming or expensive. Gold and Monte discuss some of their practical strategies on the best way to transform your home office into a comfortable and trendy space.

Declutter Your Workspace

Decluttering always appears the first step in many makeovers. Starting with a blank slate makes the job faster and easier. Clutter affects productivity. Scientists at the Princeton University Neuroscience Institute found that clutter/messes can drain our cognitive resources and reduce the ability to concentrate.

Monte says that decluttering and organizing your space makes it functional, inspiring, and gorgeous. “Start by removing the surplus and categorize each zone for exactly what you need,” suggests Monte,”that lets you understand everything you have in your office space so that you can clearly make decisions about what to keep versus what you want to eliminate.”

It’s ideal to start with your desk. Monte suggests determining what you typically use while working at your desk. Make those items readily accessible and get rid of the rest. “You do not want it to feel overloaded with so many office supplies or decorative tchotchkes you can’t actually work,” says Monte.

Focus on Posture

We have all heard that timeless advice to”stand up straight.” However, what does this have to do with working at home? Good posture, whether it’s from standing or sitting, makes it possible to center your weight properly. Appropriate posture reduces your chance of injuries. Superior posture should be practiced while sitting or standing. For proper posture, remember to maintain:

• Chin parallel to the ground
• shoulders
• neutral spine
• buttocks even
• knees even
• body weight distributed evenly on both feet (when standing)
• thighs parallel and your knees bent to 90-degrees when sitting

Adjust Desk Height

Do you stand or sit at your desk most of the time? Perhaps you do a mix of both. “If your office is tailor-made for you and customized to your workflow, you’ll see an improved sense of fulfillment in the work you do,” says Monte. One brand I recommend for creating the perfect home environment is Label 180.” When shopping, the suggested desk height for sitting is 25 to 27.5 inches, depending upon your height. Your elbows and underarms should lie directly on the desktop and on the armrests of your chair with a 90- to 110-degree angle at the elbow.

If your desk is too low, Gold recommends using a desk riser. They’re an affordable way to position your keyboard and monitor at comfortable levels. If you choose to stand, the recommended height is 35 to 47 inches. According to a report released by Harvard Health Publishing,”standing, rather than sitting, may lower the risk of back and shoulder pain.” Gold says if you are going to utilize a standing desk, use an anti-fatigue mat also. Anti-fatigue mats reduce discomfort to the feet, legs, and back while standing for long periods.

Get the Right Chair

“If you have a history of lower back problems, the first thing you may want to do is make sure your desk chair supports your lower back,” suggests Gold,”and that you have room to stand and walk around at regular intervals to take some pressure off of it.” Your desk chair should prevent you from leaning and straining. When you sitall the way back into your chair so that your backside reaches the backrest–your back doesn’t have to be flush against the back of the chair. If there’s a gap between your back and the seat, you need lumbar support. Use a low-back or lumbar pillow to fill in that area. If your budget permits, upgrade to a comfy office chair that supports your back.

Improve Your Lighting & Look Onto Your Garden

Your available light may have a significant effect on productivity, health, and preventing Computer Vision Syndrome (CVS), also known as digital eye strain. Well-distributed, diffused light will reduce eye strain and glare on computer monitors. Also, proper lighting allows you to see and perform your non-computer tasks better.

If your current workspace lacks good light, you can achieve proper lighting with desk or table lamps. Pick a lamp that offers clean, cool light that mimics daylight. Additionally, a lamp with an adjustable dimmer will allow you to customize your lighting at your desk.

“Allow as much natural light to filter into your office as possible,” suggests Monte,”working from home can sometimes feel a little bit isolating but one thing that always seems to enhance your energy level is embracing the natural light.” Natural light has the ability to make you more alert and energized–ideal for getting your job done.

Take A Few Breaks

The human body wasn’t designed to sit for long intervals. “Get up from your desk at regular intervals and get a couple of minutes of real movement in,” says Gold. Taking multiple breaks during the day will allow you to decompress your spine, stretch, and adjust your seat, if necessary. Function in increments of 25 to 28 minutes, then take a five-minute break and walk around. Moving benefits both mental and physical health. If you’re seeking a more structured program to keep track of work time/breaks, consider using the Pomodoro technique.

Although some offices and businesses have reopened with security precautions in place, the work-from-home trend is expected to continue into the first quarter of 2021. A Stanford study found that corporations are developing plans for more work-from-home options beyond the pandemic–your home office may be your new permanent office. Whether you’re working from home since pandemic or remote fulltime, setting up an ergonomic home office will help keep you physically and mentally healthier and productive.

One of the best things you can do for your health is break up your workday and spend some time in the garden. So don’t hesitate to go out and stretch your legs every once in awhile.

…